ETA Prime starts from the GMKtec Neo X1, a compact system that ships with an RTX 5070 and Windows. He removes the Nvidia card and fits an ASRock Monster Hunter Wilds Edition Radeon RX 9070 XT with 16 GB of VRAM, a model that needs only two 8-pin power connectors. The chassis is built around a soldered Ryzen 9 9955HX3D (16 cores, 32 threads) with 64 GB of SODIMM memory, and the video notes a 120 mm liquid cooler that lets the mobile chip sustain higher clocks than it would in a laptop.

Because the stock power lead does not suit the card, he uses a 12VHPWR to dual 8-pin cable, and he removes a bottom 120 mm fan so the GPU draws cool air from below and exhausts through the vented side panel. SteamOS is installed from the stock Steam Deck recovery image onto a second SSD, giving a dual-boot machine. He reports that Wi-Fi, Bluetooth and a Steam Controller dongle all worked without extra effort. The system runs stable-channel SteamOS 3.9.5 with Proton GE, which he says is needed for FSR 4.1 on the current stable release.

In testing, he reports Red Dead Redemption 2 at 4K Ultra averaging in the mid 90s with FSR on Quality, against around 58 fps without it. Crimson Desert on the Cinematic preset runs at over 80 fps at native 1440p, but 4K needs FSR 4.1 and he would rather play at 1440p. DOOM: The Dark Ages reaches about 98 fps at 1440p with path tracing off and drops to about 28 fps with it on. Forza Horizon 6 is strong at 1440p, though extreme ray tracing sends it into the high 40s. He also runs Spider-Man 2 and Cyberpunk 2077 at 1440p.

His conclusion is that the Radeon build performs very well, but the stock RTX 5070 machine remains a great performer too. He would like manufacturers to offer a Radeon option from the factory.

Key takeaways

  • The swap uses a Radeon RX 9070 XT with 16 GB, powered through a 12VHPWR to dual 8-pin cable.
  • Stock SteamOS 3.9.5 was installed on a second SSD for dual boot, with Wi-Fi and Bluetooth working without extra setup, according to the video.
  • At 1440p he needed no upscaling in any game tested; 4K Ultra or ray-traced settings needed FSR 4 or 4.1.
  • Reported figures: RDR2 4K Ultra mid 90s with FSR Quality against about 58 fps without; Crimson Desert over 80 fps at 1440p.
  • Path tracing is a weak spot: DOOM: The Dark Ages fell from about 98 fps to about 28 fps with it on.
  • FSR 4.1 on stable SteamOS needed Proton GE; no TDP controls or Decky plugins were used.

Our take

This is a single creator's experiment on one unit, with no controlled comparison against the factory RTX 5070 configuration, so the frame rates are indicative rather than a benchmark. The video also contains affiliate links. The swap is a hobbyist modification, and the card he used is a small 9070 XT that happens to fit and need only two 8-pin connectors, so other cards may not suit the chassis.

The useful takeaways are that stock SteamOS handled the hardware cleanly and that 1440p is the comfortable target, with path tracing a Radeon weak point. None of our coverage in the current shortlist bears directly on this build.